GogoJungle

If you use of our web authentication system when exhibiting the indicator, will be exhibited on My Page> Download product> Register new products>. Product system] is into an indicator. Enter the required items and check to set the □ □ authentication code. In the authentication code, there is a part to enter the product ID, so once the entry is completed, register once and check the product ID of the exhibited product. After confirming id, enter the authentication code settings. Open the editing screen of the product again ... Click the [Code Code Confirm] button in the "Upload Step 3 File] button. In the input space under the deficit, paste the source code of the indicated indicator, paste the copied one copied, click [Insert Authentication Code], and in the lower red dotted line frame below. Whether the authentication code is correctly inserted with reference to the insertion example of ? 。 Paste the copied one into Metaeditor4 and compile it. If you have a compiled EX4 file and necessary files in the product file to be uploaded, please upload them and upload . At this time, please compress the EX4 file directly below the zip file so that it is stored. * If there is no EX4 directly below zip, the identifier of Web authentication will not be granted, and the will fail to authenticate on the purchased customer, so please be careful. 。 https://www.gogojungle.co.jp/post/1/1587 * You can also check the insertion method from the above URL.