PerfectVFM EURGBP

It will be an EA that uses a long-term stable type of nanpin martin.

It will be for EURGBP only. An AUDNZD version will also be offered as a sister product.

MT+2/+3 Broker specifications.

Since the buy/sell logic is separate, depending on the market conditions, both sides may be traded.

The internal logic cannot be disclosed, but the parameters are open to the public, including short-term, high-risk, high-return settings.

You can set your preference according to your environment.

Entry: Determined by internal logic.

Nanpin ratio: Entry is determined by our proprietary volatility system.

It is not fixed, but the ratio can be changed with a parameter.

Settlement: Settlement is made according to market conditions using a proprietary volatility system.

The ratio can be changed according to the parameters, and the TP setting can also be used for settlement, but in that case, the entry must be made at the time of entry.

The same TP value or SL value applies to all positions.

Please be sure to back-test the lot size and parameters to ensure that they are appropriate for the amount of funds available.

Please use this EA at your own discretion.

Below is a backtest of AUDNZD with the same parameters.

I think we can confirm that there is an advantage even if the currency changes.

It will be sold as a sister product.

Parameter

-----Base-----

Slippage3 (The allowable number of slippage: pips)

MaxSpread3.0 (Spread filter: pips)

-----Investment Funds -----

Investment_Funds_balance ・・・ 1000000 (Forced loss cut will be made at the ratio (%) set in the following parameter to the amount entered here.)

-----Limit Loss -----

LimitLoss_percent ・・・ 50（ Ratio of forced loss cut amount to the amount set in Investment_Funds_balance (%) The ratio of the forced loss cut amount to the amount set in Investment_Funds_balance (%)

Default is 1000000 vs. (50% = All positions will be closed once the unrealized loss of the same magic number of positions in this EA is 500000 or more)

Setting the value according to the amount of funds prevents the account from going out of business.

Run_away_percent ・・・ 0.0 (to avoid holding both positions for a long period of time when the positions are both open) Set by Investment_Funds_balance.

Percentage of total amount (%) The default is 0.0. Default is 0.0. When the unrealized loss becomes 0, the trade is closed and the trader exits.　By changing the value, you can exit on the positive side or the negative side.

(However, there may be some differences in the timing of settlement, communication conditions, and brokerage firms.)

-----Currency_Lots-----

Currencyselect ・・・ If account is in Japanese Yen 1 (corresponds to USD in 2)

Lots_up_type ・・・ 0 (Fixed: The value set in Lots_up is the initial value set in Lots_first. The value set in Lots_up is added to the initial lot set in Lots_first for each position. If Lots_first is 0.01, the next position is 0.02, the next is 0.03, and so on. (Lots_first)

Lots_up_type ・・・ 1 (Multiplier: The value set in Lots_up_multiple is used as the multiplier for Lots_first Lots_up_type ・ 1 (Multiplier: The value set in Lots_up_multiple is used to calculate subsequent lots at a multiple of the initial lot set in Lots_first.　If Lots_first is 0.1 and the multiple is 1.2, the next position will be 0.12, the next 0.14, and so on. )

Lots_first = ・・・ Initial lot

Lots_up Lots_up_type is the value of the lot when set to 0 (fixed). Lots_up ・・・ Lots_up_type is the lot value when 0 (fixed).

Lots_up_multiple ・・・ Lots_up_multiple Lots_up_type 1 (multiplier)

-----Position -----

Max_position_buy ・・・ Maximum number of buy positions.

Max_position_sell ・・・ Maximum number of sell positions.

-----Main -----

The following parameters correspond to the values calculated by our proprietary volatility determination system.

The settlement amount can be changed by increasing or decreasing the value.

Profit_firstbuy_multiple ・・・ This is the settlement ratio when there is only one position to buy.

Profit_firstsell_multiple Profit_firstsell_multiple is the settlement ratio for a single position.

Profit_next_buylevel This is the ratio of the closing ratio when there are multiple positions to buy.

Profit_next_selllevel This is the ratio of the settlement ratio when there are multiple positions to be sold.

The following applies to each position individually

TakeProfit ... (Maximum profit value for buying or selling: pips)

StopLoss StopLoss (Stop value for buying or selling: pips) (Stop value :pips)

-----Parameter -----

The following are the values of parameters used internally.

I cannot tell you how it is used, but it can be varied by changing the parameters.

Highprice_period ・・・ It is the period to get the high price. (Daily).

Loweprice_period ・・・ Low priceThis will be the period to obtain the (daily)The following is a list of the most common problems with the

RSI_Price ・・・ It is the setting of the fixed leg of RSI.

Timeframes ・・・ RSI timeframes.

Rsi_period_buy ・・・ It is the period of RSI in buy.

Rsi_period_sell ・・・ It is the period of RSI in selling.

Rsi_buy_level ・・・ It is the level setting value of RSI in the buy.

Rsi_sell_level ・・・ It is the level setting value of RSI in selling.

The following parameters correspond to the values calculated by our proprietary volatility determination system.

You can change the nanpin width by increasing or decreasing the numerical value.

Price_range_buylevel ・・・ It is the range after the second position in buying. The range changes according to the situation as it is determined by volatility.

Price_range_selllevel ・・・ It is the range after the second position in selling. The range changes according to the situation as it is determined by volatility.

-----Others Setting-----

Free_comment ・・・ Comment for the order. Please set freely.

Magic1 ・・・ Set the magic number. Please set freely.