Boribanneo vs. Cal

The characteristics of this system are that it emphasizes win rate, so profits are not large, but the win rate is very high. In addition, since it uses the trail function to take profits, it is expected to increase profits to some extent in situations where profits increase all at once. When the Bollinger Bands match my main logic, I make a reverse entry. The time from entry to exit is relatively short, so there is little stress. The system has been tested and operated with the EUR/USD and USD/JPY currency pairs, so please use these two types of currencies as a base. Either one or, if you have enough funds, both can be used. If you are using one or the other, we recommend you to use EUR/USD because it performs better in the back test. The spread and price movement will inevitably differ between the forward test and the real account, so there will be a difference in performance. Although it is a small amount to start with, we would like to show you the results on OANDA Tokyo server after 10:00 on 29.05.2017 for your reference. The compound interest setting (parameter Levarage) is currently set at 1.0. (With the function to settle on weekends, we will basically disclose the results as they are, for better or worse, with no touch. We may stop the system during major events. Whether or not to do so depends on the situation. (If Levarage is the default, it is changed from 1 to 0.9 because it may be loss-cut immediately due to lack of funds when you take a position of 2 currency pairs at the same time)
https://fx-on.com/account/detail/?i=41011 *Note This EA puts a tight stop loss by the trail function. This EA works only with specific FX companies because the stop loss is put in tight with the "Trailing" function. To check, go to the menu View→Currency Pair List→Click the currency pair you wish to use and click Settings. One of the items is the stop level, which must be 0 to function. The stop level is the minimum distance between the current price and the stop value that must be set in order to place a reverse bid. It seems that 1 PIPS = 10. Specifically, when we verified this with our FX company, we found that OANDA Japan allows 0 for USD/JPY, but FXTF has 50 (5 PIPS), so it did not work. If you are considering purchasing this product, please check the currency pair stop level of your FX company first. We are real traders with OANDA Japan, and so far the trail is working well. （The big drawdown in the forward test was due to the fact that we carried over our open interest in the week before the French presidential election. The big drawdown in the forward test was due to the fact that we carried over our open interest the week before the French presidential election. Realizing the seriousness of the situation, we have added a function to close the account on the weekend. ---------------------------BoribanneoVcal Manual---(ver 1.08 or later) --------------------- This EA uses the 5-minute Bollinger Band as an indicator. This EA uses the 5-minute Bollinger Bands as an indicator to aim for a push. The EA has been tested and operated with the EUR/USD and USD/JPY currency pairs, so basically, please use it with these two types of 1-minute trades. Either one or, if you have enough funds, both can be used. If you use either one, EUR/USD is considered to be the most stable. Note: This EA uses the trail function to put in a tight stop loss, so it will only work with certain FX companies. To check, go to the menu View→Currency Pair List→Click the currency pair you wish to use and click Settings. One of the items is the stop level, which must be 0 to function. The stop level is the minimum distance between the current price and the stop value that must be set in order to place a reverse bid. It seems that 1 PIPS = 10. Specifically, when we verified this with our FX company, OANDA Japan allows 0 for USD/JPY, but FXTF has 50 (5 PIPS), so it did not work. Please check your FX company's currency pair stop levels first before considering purchasing. We are real trading with OANDA Japan (Tokyo server) and so far the trail is working well. (Of course, we cannot guarantee that the forex company will change the stop level.) The characteristics of this system are very high win rate, although the profit is not large because we focus on win rate. In addition, since profit-taking by the trail function is performed, it can be expected to increase profits to some extent in situations where profits increase all at once. Since the profit-taking is not the type to hold back, but the type to rotate, the time from entry to exit is relatively short, and stress is low. The system can be used for both EUR/USD and USD/JPY, so simultaneous operation is possible. In addition, the maximum drawdown is somewhat high by default, so please manage your money well by allocating funds with a margin of safety. Profit-taking is done by trailing, which is determined by market conditions. Loss-cut is fixed at the set value. (If you know how to install EA, you don't need to read this. Open the data folder ② Open the MQL4 folder -> Experts folder in the data folder and drag and copy BoribanneoVscalx.xx.ex4. 3) Right-click on the Expert Advisor portion of the Navigator window and select Update 4) Confirm that BoribanneoVscalx.xx is under Expert Advisor 5) Open the Tools→Expert Advisor tab at the top of the screen and allow automatic trading (5) Open the Tools→Expert Advisor tab at the top of the screen and confirm that the "Allow automated trading" and "Allow DLLs" check boxes are checked. If not, check the box. This is the end of the installation settings. If not, check the checkboxes. If the order does not pass properly, set it to "true" and then set "Nomal_Order" to "false" in ②. Normally, "true" is fine. If the order does not go through successfully, set it to false and then set Exept_Nomal_Order in (1) to true. The initial value of 12 is usually fine. Set to true when sending an e-mail at the time of entry order or order error. The initial value is false. Max_Position Maximum number of positions to buy. The default value of 1 is recommended. ⑥ Magic_Number Magic number. Please change the magic number when there is a duplicate order number in the case of multiple operations in the same account. (Even in the case of simultaneous operation of EUR/USD and USD/JPY, please change the numbers to different numbers to be sure. Default value is 3. Change as necessary. (⑧) Nomal Lots: Initial value 0.1 Please check with your FX company as the number of lots is handled differently depending on the FX company. If you wish to use fixed lots, set the Leverage at 0.0 in ⑨. -For reference - 0.1 = 10,000 currency at OANDA Japan, which we usually use. If you set the Leverage to 0.0, the fixed lot in (8) will be applied. The appropriate setting value varies depending on the server of the FX company you are using. Please adjust the setting value by conducting a back test on the server you actually trade on and confirming the appropriate lot size. OANDA (Tokyo Server) and Rakuten Real Account 0.5 to 1.0 ・OANDA(Demo Jpan Practice Yen-denominated account) Forward operation is set to 50 for both EUR/USD and USD/JPY (The default setting is set to 50 in the forward test environment because compounding does not work in the forward test environment. The back test was conducted on the EUR/USD and USD/JPY.　(The back test is EUR/USD→0.5 USD/JPY→50) ⑩ MaxSpread Default value 8 It can be changed. Sets the end time of trading for the weekend. Initial value 22:00 ⑫ WeekEndExitTime Sets the forced close time for the weekend. Initial value 22:30 *Set later than WeekEndtime in ⑪. ⑬ Band_Period Sets the period of Bollinger Band. Initial value 100 is recommended. Band_Timeframe The time axis (minutes) used for Bollinger Bands. A default value of 1 is recommended. (15) Buy_Stoplos Maximum buy trade stop-loss value. A default value of around 50 is recommended. ⑯ Buy_Target Maximum buy trade take profit setting. Since this is a trail, a default value of 70 or higher is recommended. ⑰ Sell_Stoplos Set the maximum stop-loss value for sell trades. A default value of around 50 is recommended. ⑱ Sell_Target Set the maximum take-profit value for a sell trade. The default value of 70 or higher is recommended for trailing trades. (⑲ StartTime1 Trade start time: Initial value 23:00, USD/JPY reference value 21:00⑳ EndTime1 Trade end time: Initial value 03:00 (However, the open position is not closed. It is the time to stop entry. StartTime2 Trade start time Initial value 12:00 USD/JPY reference set value 13:00 ㉒ EndTime2 Trade end time Initial value 16:00 (However, the open position will not be closed. Trade _mon Set to "true" to trade on Mondays. Set to true if trading on Monday ㉒ Trade_tue Set to true if trading on Tuesday ㉒ Trade _mon Set to true if trading on Monday ㉒ Trade_tue Set to true if trading on Tuesday Set to true if trading on Wednesday ㉓ Trade_wed Set to true if trading on Wednesday ㉓ Trade _mon Set to true if trading on Monday ㉒ Trade _tue Set to true if trading on Tuesday Default value true ㉕ Trade_thu Set to true if trading on Thursday. Default value true ㉔ Trade_fri Set to true to trade on Friday. Default value is true *Trade date and time setting item The time is not Japan time, but the time of your broker's server. This is the time shown in the quote. The default trade time is set to the time of good backtesting in the case of winter time: GMT+2 and summer time: GMT+3. This is the end of the explanation of the parameters.