スキャルメイカー

*The high-risk periods around the year-end and New Year (12/25 - 1/7) and GW (4/19 - 5/19) are deprecated and trading is automatically restricted during these periods. (It is also possible to trade by setting the setting to false.)
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ This product is a Lite version of the Nanpin Maker, which focuses on the functions of the Nanpin Maker exclusively for scalping. ((→5 account license version also released!) *January 2021 ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

You can create your own original EA for all currency pairs.

The subtleties of the nanpin EA are clear. Are you using a nanpin EA and using discretion to close or modify TPs? This EA is an EA that allows you to create your own original EA that can scratch the itch of Nanpin EA. (The following issues can be customized to suit each currency pair.) The initial lot size is too small, and the profit will not be confirmed without the entry of the second position or later. The initial lot size is too small, and the trader will not take profits without a second entry or later. Even if the market is going down sharply, the trader will keep on pinching at a fixed range. I don't cut my losses. It is hard to reverse a trend. Drawdowns are too tight... Although it is a prerequisite to have unrealized losses, it is not a good idea to trade in a range that is too wide. However, if you grasp the characteristics of the currency pair and adjust the appropriate range, multiplier, and lot size, you can create a stable and undefeated EA with low drawdowns. However, if you grasp the characteristics of the currency pair and adjust the appropriate number of pins, multiplier, and lot size, you can create a stable and undefeated EA with low drawdowns. In other words, you can get a regular income every day with the maximum DD amount as collateral. It is possible to create your own original EA with this one EA without limit. Backtest confirmation points are initial capital and maximum drawdown amount While the graph of a nanpin EA will generally show a nice, steady upward trend, it is important to check the maximum unrealized loss over the past (10 years or so) in relation to the funds. The key point to check is how much unrealized loss there has been in the past (over a period of about 10 years) in relation to the funds. For example, if you have an initial capital of 50,000,000 yen (in US dollars) and a maximum drawdown of 80,000,000 yen, there is a possibility of an unrealized loss of 8,000,000 yen at any time. Even if there has been no drawdown for several months, one day you will suddenly have an unrealized loss of 8 million yen (forced loss cut), so when dealing with a no-pin EA, be careful not to use it for a long period of time.About 10 years "initial capital > maximum DD amount"The most important thing is to make sure that the maximum unrealized loss plus the margin requirement is within your funds. In addition to this, margin requirements are required, so the design should be such that the maximum unrealized loss + margin requirements are kept within the funds. We recommend that the maximum DD should be 50% or less of the initial capital. If you design your account so that the maximum DD is within 50% of the initial capital, your assets will increase without decreasing even a single yen. Since each trader's capital situation and acceptable risk varies, we recommend that you consider how to take additional positions and what your target is. The way to take additional positions and target profits also vary. All of these can be set, allowing for flexible operations that reduce risk as much as possible. Scalmaker allows traders to pursue the lowest drawdown and no-loss settings for each currency pair by making full use of the following features. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Worth more than 2 EAs

Included configuration files for the following 3 currency pairs 〜Two settings with low drawdown amounts ~. High-speed Scalping "EURUSD 15M" Explosive number of trades for fast gains We reverse the trend on a 15-minute time frame. Over 2,800 trades per year to make a small profit. Highly accurate reverse engine with low drawdowns. Initial TP = 120 yen, 12 positions, 4.3 pips of stop loss, initial lot 0.02, lot up 0.01 High-speed scalping "GBPUSD 15M The 15 minute trades are reverse trades. Tuned for GBP with about 2000 trades per year. Initial TP=100JPY, 15 positions, 7 pips of stop loss, initial lot 0.01, lot up 0.01. Both setups are designed to be safe, with drawdowns kept to a minimum. Although the stop-loss amount is set, we have not had any loss in the past 10 years. Included are the above files for EURUSD and GBPUSD. ↓↓As soon as we find a good combination of new currency pairs and settings, we will provide them free of charge. >> Free configuration is always available on the Zenzai blog! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Scalmaker Features (1) Incremental Step Profit Ratio The first position of a nanpin EA has a small lot and a small profit, but it is far from reaching a profit, or Also, in the latter half of the nanpinning period (e.g., the 10th position), the profit does not reach the profit point, even though it has a strong meaning of relief. The solution to this problem is to set the "Step Profit Ratio". A] For the additional lot, the same pips profit as the initial lot is sought. (Step profit increase rate = 100%) The common example of a profit point is X pips from the average price of the position. This is an example. The profit increases in the second half of the step-up, but at the same time, the possibility of reaching the profit point decreases. B] On the other hand, if the target profit is constant, it is easier to close the position in the second half, and the risk is reduced. However, in the first half of the trading day, the profit will be almost zero, and the trader will be forced to rely on "nan-pin". C] The step profit increase rate setting allows you to target the first position, and to take advantage of the profit increase rate in the second half of the position. In addition, the second half of the position will bail out exactly. If 50% is set, 50% profit will be sought for each additional lot. Initial profit of 1000 yen for the first position of 0.1 lot 2nd position 0.2 lot, 2000 yen x 50% = 1000 yen Target profit: 1000 yen added → Total 2000 yen Third position 0.3 lot, 3000 yen × 50% × 50% = 750 yen Target profit: 750 yen added → Total 2,750 yen Scalmaker Function (2) Risk Aversion Handover The weakness of nan-pinning is that unrealized losses can grow large due to a sharp rise and fall in the market. If it is just an ordinary indicator, it is often a positive result. However, unexpected fundamental ups and downs are the weak point. To avoid this as much as possible, we automatically close the account on weekends if the profit is positive. Also, the EA is automatically stopped during the year-end and New Year holidays and around GW, when crashes and spikes are more likely to occur. The EA will be automatically restarted after the end of the period. If a position is still open, it is automatically closed if it becomes positive. Trading suspension during risk periods can be set to on or off. Scalmaker Feature 3: High-precision reverse engine A nanpin EA continues to hold a position in the same direction until it becomes positive, but However, if the first entry is against the trend, you will be at a disadvantage from the start. With Scalmaker's proprietary high-precision reverse engine, you can avoid this situation. We do not take the first position at random. It assumes the possibility of several future patterns and takes the first position in reverse. This reduces the number of reverse trend entries. *This applies when the reverse trend is selected in the entry logic. Scalmaker Function 4: Discretionary and other EA Linkage Function It is possible to settle all discretionary positions or positions entered by other EAs with a set amount of money. To use this function, set the initial entry to false, so that the scalermaker does not make the initial entry, but only the nanpin and settlement. If the scarmaker is linked to a discretionary account, the magic number is set to 0. If it is linked to other EAs, set the magic number to the common magic number. Scalmaker Function 5: Pseudo-trailing Function Pseudo-trailing function is available. When the price goes backwards by ◯ pips from the highest price of the current bar, all the trades will be closed. This function can be used to add to the amount of profit in the event of a sudden rise or fall. In the case of a number of trades with many positions, using a trailing stop is counterproductive because it increases the risk of missing a profit and causing a drawdown, but by adding a very small trailing function, it is possible to increase profits. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Notes and Supplementary Information

■One EA can be used for any currency pair. The time frame can be applied to 1-minute, 5-minute, and 15-minute charts. *Be sure to change the magic number for each currency pair to which you apply. If you wish to use separate accounts, please purchase enough for each account. ■The multiplier can be set for the lot up portion. This allows the differential portion of each entry lot to be set to an equal ratio, or the entry lot itself can be set to an equal ratio (0.1→0.3→0.3→0.3). The entry lot itself can also be set to an equal ratio (0.1 → 0.3 → 0.9 → 2.7). ■There can be differences from forward and backtests. Future market fluctuations may not always be as shown. Please use at your own risk. The margin requirement for the total number of lots + the expected maximum drawdown Please operate within sufficient funds, taking into account the The back-tests are based on Dukascopy's tick data and are denominated in Japanese yen. Earnings and results may vary depending on your broker. The backtest can also be used for "Dollar-denominated accounts". If you wish to change the settings in the included configuration file, please contact your broker. If you wish to change the settings in the included configuration file, please back-test with your broker or test with a demo account. Please pay particular attention to lot management. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝