Dollar-cost averaging maker

Release commemorative sale for 22,000 yen. (※ Please note that it will be 28,000 yen after the end of the period) ====================================================

You can create your own original umps for all currency pairs / hours

The subtle part of Namping EA is refreshing. Are you using a Namping EA, are you making a discretionary payment or modifying a TP? This EA is an EA that can produce your own original EA that is accessible to the itching part of Nampin EA. (You can customize the following issues as appropriate for each currency pair) ・ The initial lot is too small, and can not be confirmed without an entry after the second position. ・ We are troubled to pick up infinitely ・ Even if the market price drops, you will pick up with a fixed pick width. ・ We do not cut loss ・ It is hard to face the trend ・ Draw down too tight ・ ・ ・ It is assumed that the pick-up trade is subject to loss on inclusion, If you get the characteristics of the currency pair and adjust the proper pick-up width, multiplication factor and lot, It is possible to create a low drawdown unbeaten EA. In other words, you can get a regular income every day with the maximum DD amount as collateral. It is possible to create your own original EA infinitely with this one. Back test confirmation points are the initial funds and the maximum drawdown amount In Namping EA, it will generally be a beautiful graph of rising to the right, The point of confirmation is the maximum amount of unrealized losses in the past (about 10 years) for funds. If the initial drawdown amount is 50000 (dollar-denominated yen = 5 million yen) and the maximum drawdown amount is 80,000, it means that an unrealized loss of 8 million yen may occur at any time. Even if there is no drawdown for several months, one day a sudden loss of 8 million yen (forced loss cut) will be carried out one day, so when dealing with umpinning EA, about 10 years It is most important to check "Initial Fund> Maximum DD Amount" . Since it plus plus necessary margin is necessary, let's design so that the maximum unemployed loss + necessary margin can be included in the fund. We recommend using a maximum DD of 50% or less of the initial funds as a guide. If you design the maximum DD to be within 50% of the initial funds, assets will increase without neglecting the yen. Since the situation of funds and the allowable risk vary depending on the trader, There are a variety of ways to take additional positions, and the benefits to target. All of these can be set, and the operation can be freely reduced as much as possible. Namping Maker is able to pursue the lowest drawdown and unbeatable settings for each currency pair, using the following features: ====================================================

3 or more worth of EA

The following three currency pair configuration files are included ~ 3 settings with reduced drawdown amount ~ ■ A royal road easy to form a range 'AUDCAD 15M' Realization of profitability and low drawdown We will arrange in 15 minutes. The number of transactions is about 500 times a year. We will take safety picks. Initial TP = 800 yen, number of positions 12, bump width 6.5 pips, initial lot 0.05, lot up 0.01 ■ High-speed scalping 'EURUSD 15M' High-speed profit confirmation with explosive transaction times We will be upside down in 15 minutes. We will be profitable in detail by trading more than 2800 times a year. Low drawdown operation with high-precision reverse tension engine. Initial TP = 120 yen, number of positions 12, namp width 4.3 pips, initial lot 0.02, lot up 0.01 ■ Security Daytore 'AUDNZD 1H' A currency pair suitable for pick-ups We will be upside down in one hour. The annual transaction is about 330 times, and selling and buying move independently. If there is a chance that one side is in the process of picking up, it may be double-sided, but according to the back test below, It is only about 4 times in 10 years that one side gets out of the field of the Namping range. The pick-up width is 25 pips, and a relatively loose day-to-day workout is performed. Initial TP = 1,000 yen, number of positions 8, bump width 25 pips, initial lot 0.04, lot up 0.02 Each setting has a safe design with a reduced drawdown, Although we have set a loss cut amount, it has never been lost for the past 10 years. The above AUDCAD, EURUSD, and AUDNZD pre-set files are included. ↓ で 組 み 合 わ せ 組 み 合 わ せ 随時 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 次第 良 い 良 い 良 い 良 い 良 い 良 い 良 い 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 組 み 合 わ せ 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い 良 い > Anytime on the Zenzai blog, setting free release! ※ Now, the above-mentioned AUDCAD low-lot, low-risk setting and GBPUSD's scalping setting are released. ==================================================== Nampin maker's function One-step profit increase In the 1st position of the Namping EA, the lot is small and the profit is small, but it is far from being accurate. In addition, in the second half of the Namping (the 10th position, etc.), although the meaning of the relief is strong, it does not reach to the accuracy. The solution to that is the setting of "step profit increase rate". [A] Obtain the same pips profit as the initial lot for the additional lot. (Step income increase rate = 100%) Frequently, from the average price of the position to ○ pips is the point of probation. Here is an example. Profits will increase in the latter half of the Namping, but at the same time, the probability of reaching the point of confidence will be reduced. [B] On the other hand, if the target profit is constant, it will be easier to finish the second half and the risk will be reduced, In the first half, it is almost impossible to confirm, and it will be a pick-up. [C] You can aim from the first position by setting the step profit increase rate, Also, in the second half position, I will be relieved exactly. If you set it to 50%, you will earn a 50% profit for the added lot. Initial profit is 0.1 yen with 1 positive 0.1 lot 2nd positive 0.2 lot 2000 yen × 50% = 1000 yen Target profit: Addition of 1000 yen → Total 2000 yen 3rd positive 0.3 lot 3000 yen × 50% × 50% = 750 yen Target profit: Addition of 750 yen → Total 2750 yen Nampin Maker Functions 2 Anomalous Safety Nanping With fixed-width picks, you just keep holding the position with a certain pips retrograde mechanically. This is valid if it is movement within a certain fixed range, up to several yen or several yen, but even when the market changes suddenly, As we will continue to hold positions forever, the potential for bankruptcy will be high. The Picking Maker is equipped with the "Abnormal Safety Picking" function. When reversing the set pips, make sure to return to the forward without taking a position immediately, Have additional positions. Specifically, in the minutes of the chart applied, it will be after checking the forward order for three. For 5 minutes, check for about 15 minutes in 3 minutes. For 15 minutes, check for about 45 minutes in 3 minutes. It will be. In addition, you can also set the multiplication factor for the bump width and gradually increase the interval. (Even if you set the safety namping = false, you will not have an additional position in the event of a sudden crash or surge) This will make it possible to dramatically reduce the drawdown that is common to Namping EA. ※ In the case of scalping, it is necessary to pick up quickly at narrow intervals, Set this function to False. Nampin Maker Functions 3 Risk Avoidance The weak point of the umpire is that the ups and downs slump and the unrealized losses grow large. If it is the usual index level, it is often positive on the contrary, but The point is that unexpected fundamentals are rising and falling. The weekend is closed automatically if the profit is positive so as to avoid this as much as possible. In addition, it is easy for a crash and a surge, the year-end and New Year holidays and around GW automatically stop EA. It will restart automatically after the period ends. If the position is held, it will be picked up until the end of the set, and it will be settled automatically if it becomes positive. ※ You can set on / off to stop trading during the risk period. Panpin maker functions 4 High-precision back tension engine The Picking EA will continue to have a position in the same direction until it is positive, If the first entry in the first position runs against the trend, you will be at a disadvantage from the beginning. Picking up with a proprietary high-precision reverse-tension engine It does not have the 1st position appropriately. We will reverse the first position assuming the future possibilities of several patterns. This is reducing the contradiction entry of the trend retrogression. ※ It is applied when you select the reverse in the entry logic. Nampin maker function 5 Day-Trewing is also possible At Namping Maker, settings and settings that keep on 24 hours a day It can be set freely, such as setting to aim at a large target in the medium term, such as day training and swing. Although it is named as a pick-up maker, it also functions as a swing EA by setting the maximum position to about 4 and widening the pick-up width. In addition, it will be cut off when the pure "loss amount" including swaps and fees etc. reaches the set value. You can also use backtesting to find parameter settings that do not fall short of losses. With this one, you can create the best EA for any currency pair, and your portfolio is complete.