『ATS-12 RSI』 Last week's performance ～2024/10/26
Last week's result announcement!
（Trading with margin 1,000,000 yen / 0.3 Lots）
Aggregation period: 2024/10/21～2024/10/26
In one week, 3,898 yen profit was made!
Even with a small lot of “0.3 Lots,” there are plenty of profits every week!
Last week’s Plus 62,374 yen
The previous week’s Plus 76,852 yenContinuing with excellent results!
In this space, we will introduce actual trading results using the『ATS-12 RSI』.
There are several trading methods using『ATS-12 RSI』, and we will also explain at what timing we acquired and closed positions using this system.
Additionally, we will publish which settings were adopted.
Last week's settings
【October 21】
[Settings image 1]
[Settings image 2]
[Settings image 3]
As shown in the three charts above, I set『ATS-12 RSI』 on three charts and traded with the above settings.
※ An optimizer that automatically extracts optimization data is included, so you can easily find settings that fit the current market!
Last week's results!
[Trading history image]
[Trading history image / magnified]
The results are splendid!
In one week, 3,898 yen profit was made!
This time, we traded in the “2. Scalping trade (Intermediate)” introduced later!
Although the profit was small because the number of trades was low, I will try again with settings that yield more trades!
For now, a splendid result again! Profit continues!
The three trading methods are introduced at the end of this article.
Results up to that point!
（Trading with margin 1,000,000 yen / 0.3 lots）
Aggregation period: 2024/10/14～2024/10/19 (1 week)
Settings at that time here
＋62,374 yen
[Trading history image]
Aggregation period: 2024/10/07～2024/10/12 (1 week)
Settings at that time here
＋76,852 yen
[Trading history image]
Three trading methods
Acquisition is at the first signal, and settlement is at the scalping mode settlement point. A high-win-rate, solid trade is possible.
※ We recommend this method until you grasp the knack and start winning.
This method trades only once between the start flag and the end flag. The points you can gain are modest, but it is the most reliable among the three. First, set the parameter “ScalMode_Flag” to ON “true.” This will display scalping-oriented acquisition and settlement points on the chart.
① The first flag is the acquisition point.
② Then settle at the scalping settlement point.
③ If an end flag appears while you hold a position, forcibly close it.
Initially, after acquiring at point ①, if point ② is displayed and you are in profit, it is prudent to settle early.
As you get used to it, aim for the second and third points, and later the scalping settlement points.
■ About the settings: The numbers on the score panel do not need to be as high as the other two methods.
This method is a scalping approach that executes several trades between the start flag and the end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition/settlement points will be displayed.
① When the scalping acquisition point is displayed, acquire the position.
② Settle the position at the settlement point.
③ Trade a few times until the end flag is displayed.
④ If an end flag appears while you hold a position, forcibly settle and wait for the next opportunity.
※ There are two main ways to handle acquisition among us.
One is to acquire one position and wait for the settlement point.
The other is to add positions in very small lots at each acquisition point and settle all at the settlement point, repeating this process.
Either way can yield results. Until you are used to it, start with small lots and find the method that suits you best—this is part of the enjoyment.
Once you are comfortable with this technique and can profit, try higher-level settings via related systems. It should yield even greater results.
■ About the settings: This method benefits from high-level settings.
Having the automatic high-setting detector “ATS-12 RSI AutoSearch” and the one-click acquisition “ATS-12 RSI 1Click” would help you achieve results efficiently.
【Trading method 3】Basic swing and day trading
This method is simple: acquire at the start flag and settle at the end flag.
Set the parameter “ScalMode_Flag” to OFF “false,” and hide scalping signals. ① Acquire the position at the start flag.
② Settle at the end flag.
Acquisition and settlement are very simple, but the settings are actually very important.
If you trade according to the signals, the result will match the numbers on the score panel.
Also, the per-trade profit and loss is the largest among the three methods.
In other words, this method is simple and demands the highest level of settings.
■ About the settings: This method requires the highest level settings. We recommend having the included “ATS-12 RSI AutoSearch.”
This post corresponds to the following table’s■ section.
Using RSI to trade in line with the current trend, we would like to share a portion of data extracted from the ‘ATS’.
We will revisit how to read and use this data at the end!
（Trading with margin 1,000,000 yen / 0.3 Lots）
Aggregation period: 2024/10/21～2024/10/26
In one week, 3,898 yen profit was made!
Even with a small lot of “0.3 Lots,” there are plenty of profits every week!
Last week’s Plus 62,374 yen
The previous week’s Plus 76,852 yenContinuing with excellent results!
In this space, we will introduce actual trading results using the『ATS-12 RSI』.
There are several trading methods using『ATS-12 RSI』, and we will also explain at what timing we acquired and closed positions using this system.
Additionally, we will publish which settings were adopted.
Last week's settings
【October 21】
[Settings image 1]
[Settings image 2]
[Settings image 3]
As shown in the three charts above, I set『ATS-12 RSI』 on three charts and traded with the above settings.
※ An optimizer that automatically extracts optimization data is included, so you can easily find settings that fit the current market!
Last week's results!
[Trading history image]
[Trading history image / magnified]
The results are splendid!
In one week, 3,898 yen profit was made!
This time, we traded in the “2. Scalping trade (Intermediate)” introduced later!
Although the profit was small because the number of trades was low, I will try again with settings that yield more trades!
For now, a splendid result again! Profit continues!
The three trading methods are introduced at the end of this article.
Results up to that point!
（Trading with margin 1,000,000 yen / 0.3 lots）
Aggregation period: 2024/10/14～2024/10/19 (1 week)
Settings at that time here
＋62,374 yen
[Trading history image]
Aggregation period: 2024/10/07～2024/10/12 (1 week)
Settings at that time here
＋76,852 yen
[Trading history image]
Three trading methods
1. Beginner – One-shot trading
【Trading method 1】 High-win-rate, solid day trading mode too!Acquisition is at the first signal, and settlement is at the scalping mode settlement point. A high-win-rate, solid trade is possible.
※ We recommend this method until you grasp the knack and start winning.
This method trades only once between the start flag and the end flag. The points you can gain are modest, but it is the most reliable among the three. First, set the parameter “ScalMode_Flag” to ON “true.” This will display scalping-oriented acquisition and settlement points on the chart.
① The first flag is the acquisition point.
② Then settle at the scalping settlement point.
③ If an end flag appears while you hold a position, forcibly close it.
Initially, after acquiring at point ①, if point ② is displayed and you are in profit, it is prudent to settle early.
As you get used to it, aim for the second and third points, and later the scalping settlement points.
■ About the settings: The numbers on the score panel do not need to be as high as the other two methods.
2. Intermediate – Scalping trade
【Trading method 2】 Scalping mode!
This method is a scalping approach that executes several trades between the start flag and the end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition/settlement points will be displayed.
① When the scalping acquisition point is displayed, acquire the position.
② Settle the position at the settlement point.
③ Trade a few times until the end flag is displayed.
④ If an end flag appears while you hold a position, forcibly settle and wait for the next opportunity.
※ There are two main ways to handle acquisition among us.
One is to acquire one position and wait for the settlement point.
The other is to add positions in very small lots at each acquisition point and settle all at the settlement point, repeating this process.
Either way can yield results. Until you are used to it, start with small lots and find the method that suits you best—this is part of the enjoyment.
Once you are comfortable with this technique and can profit, try higher-level settings via related systems. It should yield even greater results.
■ About the settings: This method benefits from high-level settings.
Having the automatic high-setting detector “ATS-12 RSI AutoSearch” and the one-click acquisition “ATS-12 RSI 1Click” would help you achieve results efficiently.
3. Intermediate-Advanced – Swing & Day trading
【Trading method 3】Basic swing and day trading
This method is simple: acquire at the start flag and settle at the end flag.
Set the parameter “ScalMode_Flag” to OFF “false,” and hide scalping signals. ① Acquire the position at the start flag.
② Settle at the end flag.
Acquisition and settlement are very simple, but the settings are actually very important.
If you trade according to the signals, the result will match the numbers on the score panel.
Also, the per-trade profit and loss is the largest among the three methods.
In other words, this method is simple and demands the highest level of settings.
■ About the settings: This method requires the highest level settings. We recommend having the included “ATS-12 RSI AutoSearch.”
This post corresponds to the following table’s■ section.
Using RSI to trade in line with the current trend, we would like to share a portion of data extracted from the ‘ATS’.
We will revisit how to read and use this data at the end!
(Paid version) |
(All 8 sessions) (Free) |
(Free) |
(Free) |
||
| ATS-12 RSI | 70% OFF [From here] |
Free公開中 [From here] |
to view! [From here] |
|
|
| ATS-13 RCI | 75% OFF [From here] |
Start decision! |
to view! [From here] |
here! [From here] |
|
| ATS-11 Ma | 80% OFF [From here] |
Start planned! |
Here [From here] |
Continuing! [From here] |
× ![]()
