『ATS-13 RCI』 Last week's performance ～2024/10/19
Last week's results!
(Trading with a margin of 1,000,000 yen / 0.3 Lots)
Period: 2024/10/14～2024/10/19
In one week, there was a profit of 49,746 yen!
Even with a small lot like “0.3 Lots,” so much profit was earned!
Previous,plus14,600 yen, continuing to achieve good results!
Here we introduce trades actually made using the『ATS-13 RCI』.
There are several trading methods using 『ATS-13 RCI』, and I will also explain at what timing we acquired and closed positions using this system.
Also, we will publish what settings were adopted.
Last week's settings
[October 14]
[Settings image 1]
[Settings image 2]
[Settings image 3]
As shown in the above three charts, we set up ‘ATS-13 RCI’ and traded with the above settings.
* An automatic optimizer data search engine is included, so you can easily find settings suited to the current market!
Last week's results!
[Trading history image]
[Trading history image / magnified]
The results are excellent!
In one week, there was a profit of 49,746 yen!
This time, we traded using the pattern introduced later in “2. Intermediate – Scalping Trades.”
Three trading methods are introduced at the end of this article.
Earlier results!
(Trading with a margin of 1,000,000 yen / 0.3 lots)
Period: 2024/10/07～2024/10/12
The settings at that time
＋14,600 yen
[Trading history image]
Three trading methods
* The images are carried over from the “ATS-12 RSI” version.
The specifications are the same.
Acquisition at the initial signal, and closure at the scalping mode closing point. A high-win-rate, solid trade is possible.
* It is recommended to use this method until you have the knack and start winning.
This method trades only once between the start flag and the end flag. The points gained are modest, but it is the most reliable and highest-win-rate among the three methods. First, set the parameter “ScalMode_Flag” to ON “true.” A scalping-oriented acquisition/closure point will be displayed on the chart.
① The initial flag is the acquisition point.
② Then close at the scalping closure point.
③ If an end flag appears while holding a position, forcibly close.
First, after obtaining point ①, when point ② is displayed, it is more prudent to close at a positive stage.
As you get used to it, aim for the second and third points and then the subsequent scalping closure points.
■ About settings: The numeric values on the score panel do not have to be as high as the other two methods.
This scalping method involves multiple trades between the start flag and end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition/closure points will be shown.
① When the scalping acquisition point is shown, acquire the position.
② Close the position at the closure point.
③ Trade several times until the end flag appears.
④ If an end flag appears while holding a position, forcibly close and wait for the next opportunity.
* There are two major approaches to acquisition among us.
One is to acquire one position and wait for the closure point.
The other is to add positions in very small lots at each acquisition point and close all at the closure point, repeating this process.
Either way can yield results. In any case, until you are used to it, start with small lots and find a method that suits you.
Once you become accustomed to this method and start gaining profits, try implementing it with higher settings using related systems. This should yield even greater results.
■ About settings: This method benefits from high-level settings.
Having the “ATS-13 RCI AutoSearch” to automatically detect high settings and the “ATS-13 RCI 1Click” for one-click acquisition will likely help you achieve results efficiently.
【Trading Method 3】 Basic Swing/Day Trade
This method acquires at the start flag and closes at the end flag, a simple approach.
Set the parameter “ScalMode_Flag” to OFF “false” and hide scalping signals. ① Acquire the position at the start flag.
② Close at the end flag.
Acquisition and closure are very simple, but the settings are actually very important.
If you trade strictly according to the signals, you will get results that match the score panel values.
Also, this method yields the largest profit or loss per trade.
In short, this method is simple yet demands the highest standard of settings.
■ About settings: This method requires the highest-level settings. We recommend you have the accompanying “ATS-13 RCI AutoSearch.”
This post is the part of the following table.■.
Using RSI to trade in line with the current trend, we will introduce some of the data extracted from “ATS.”
We will revisit how to read and use this data at the end!
(Trading with a margin of 1,000,000 yen / 0.3 Lots)
Period: 2024/10/14～2024/10/19
In one week, there was a profit of 49,746 yen!
Even with a small lot like “0.3 Lots,” so much profit was earned!
Previous,plus14,600 yen, continuing to achieve good results!
Here we introduce trades actually made using the『ATS-13 RCI』.
There are several trading methods using 『ATS-13 RCI』, and I will also explain at what timing we acquired and closed positions using this system.
Also, we will publish what settings were adopted.
Last week's settings
[October 14]
[Settings image 1]
[Settings image 2]
[Settings image 3]
As shown in the above three charts, we set up ‘ATS-13 RCI’ and traded with the above settings.
* An automatic optimizer data search engine is included, so you can easily find settings suited to the current market!
Last week's results!
[Trading history image]
[Trading history image / magnified]
The results are excellent!
In one week, there was a profit of 49,746 yen!
This time, we traded using the pattern introduced later in “2. Intermediate – Scalping Trades.”
Three trading methods are introduced at the end of this article.
Earlier results!
(Trading with a margin of 1,000,000 yen / 0.3 lots)
Period: 2024/10/07～2024/10/12
The settings at that time
＋14,600 yen
[Trading history image]
Three trading methods
* The images are carried over from the “ATS-12 RSI” version.
The specifications are the same.
1. Beginner Edition: One-Shot Trade
【Trading Method 1】 High-win-rate, solid day-trade mode too!Acquisition at the initial signal, and closure at the scalping mode closing point. A high-win-rate, solid trade is possible.
* It is recommended to use this method until you have the knack and start winning.
This method trades only once between the start flag and the end flag. The points gained are modest, but it is the most reliable and highest-win-rate among the three methods. First, set the parameter “ScalMode_Flag” to ON “true.” A scalping-oriented acquisition/closure point will be displayed on the chart.
① The initial flag is the acquisition point.
② Then close at the scalping closure point.
③ If an end flag appears while holding a position, forcibly close.
First, after obtaining point ①, when point ② is displayed, it is more prudent to close at a positive stage.
As you get used to it, aim for the second and third points and then the subsequent scalping closure points.
■ About settings: The numeric values on the score panel do not have to be as high as the other two methods.
2. Intermediate Edition: Scalping Trade
【Trading Method 2】 Scalping mode!
This scalping method involves multiple trades between the start flag and end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition/closure points will be shown.
① When the scalping acquisition point is shown, acquire the position.
② Close the position at the closure point.
③ Trade several times until the end flag appears.
④ If an end flag appears while holding a position, forcibly close and wait for the next opportunity.
* There are two major approaches to acquisition among us.
One is to acquire one position and wait for the closure point.
The other is to add positions in very small lots at each acquisition point and close all at the closure point, repeating this process.
Either way can yield results. In any case, until you are used to it, start with small lots and find a method that suits you.
Once you become accustomed to this method and start gaining profits, try implementing it with higher settings using related systems. This should yield even greater results.
■ About settings: This method benefits from high-level settings.
Having the “ATS-13 RCI AutoSearch” to automatically detect high settings and the “ATS-13 RCI 1Click” for one-click acquisition will likely help you achieve results efficiently.
3. Intermediate-Advanced Edition: Swing & Day Trading
【Trading Method 3】 Basic Swing/Day Trade
This method acquires at the start flag and closes at the end flag, a simple approach.
Set the parameter “ScalMode_Flag” to OFF “false” and hide scalping signals. ① Acquire the position at the start flag.
② Close at the end flag.
Acquisition and closure are very simple, but the settings are actually very important.
If you trade strictly according to the signals, you will get results that match the score panel values.
Also, this method yields the largest profit or loss per trade.
In short, this method is simple yet demands the highest standard of settings.
■ About settings: This method requires the highest-level settings. We recommend you have the accompanying “ATS-13 RCI AutoSearch.”
This post is the part of the following table.■.
Using RSI to trade in line with the current trend, we will introduce some of the data extracted from “ATS.”
We will revisit how to read and use this data at the end!
(Paid version) |
(All 8 sessions) (Free) |
(Free) |
(Free) |
||
| ATS-12 RSI | 70% OFF [From here] |
Free for viewing! [From here] |
now! [From here] |
Continuing strong [From here] |
|
| ATS-13 RCI | 75% OFF [From here] |
Start decision! |
now! [From here] |
|
|
| ATS-11 Ma | 80% OFF [From here] |
Start planned! |
to use it! [From here] |
Performance now available [From here] |
× ![]()
