『ATS-11 Ma』 Last week's performance ～2024/10/19
Last Week's Results!
(Trading with 1,000,000 yen margin / 0.3 Lots)
Aggregation period: 2024/10/14 to 2024/10/19
In one week, profit of 17,908 yen was made!
Even with a small lot like “0.3 Lots,” this much profit is possible!
Previous’splus85,304 yencontinues to show good results!
Here, we will introduce actual trading results using the ‘ATS-11 Ma’.
There are several trading methods using ‘ATS-11 Ma,’ and we will also explain when to acquire and close positions with this system, and what settings were used.
We will also publish what settings were adopted.
Last Week’s Settings
[October 14]
[Settings Image 1]
[Settings Image 2]
As in the image above, set ‘ATS-11 Ma’ on two charts and trade with the above settings.
※ An automatic optimization data search engine is also included, so you can easily find settings that suit the current market!
Last Week’s Results!
[Trade history image]
[Trade history image / partial zoom]
The results are excellent!
In one week, profit of 17,908 yen was made!
This time, we traded using the pattern introduced later in “3. Swing & Day Trade (Intermediate/Advanced).”
Three trading methods are introduced at the end of this article.
Results up to the week before last!
(Trading with 1,000,000 yen margin / 0.3 lots)
Aggregation period: 2024/09/30 to 2024/10/12
The settings then
Plus 85,304 yen
[Trade history image]
Three trading methods
※ Images are reused from the “ATS-12 RSI” version.
The specifications are the same.
Acquisition at the first signal, close at the scalping-close point. A high-win-rate, solid trade is possible.
※ This method is recommended until you get the hang of it and start winning.
This method trades only once between the start flag and the end flag. The points gained are modest, but it is the highest win-rate and most reliable among the three. First, set the parameter “ScalMode_Flag” to ON “true.” The chart will display scalping-oriented acquisition and close points.
① The first flag is the acquisition point.
② Then close at the scalping close point.
③ If an end flag appears while holding a position, forcibly close then.
At first, after ① acquisition, when the ② point is shown, it is more prudent to close at the plus stage.
As you get used to it, aim for the 2nd and 3rd points, and later scalping close points.
■ About settings: The numbers on the score panel do not need to be as high as the other two methods.
This method is a scalping approach that trades several times between the start flag and end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition and close points will be displayed.
① When the scalping acquisition point is shown, acquire the position.
② Close the position at the close point.
③ Trade several times until the end flag is displayed.
④ If an end flag appears while holding a position, forcibly close and wait for the next opportunity.
※ Regarding acquisition, we may use two main approaches among this method.
One is to acquire one position and then wait for the close point.
The other is to add positions in very small lots at each acquisition point and close all at the close points, repeating the process.
Either approach can yield results. In any case, until you get used to it, start with small lots and find a method that suits you.
Once you are accustomed to this method and can gain profits, try implementing it with higher settings using related systems. You should be able to achieve even greater results.
■ About settings: This method requires high-level settings.
Having tools like the automatic detector “ATS-11 Ma AutoSearch” and one-click acquisition with “ATS-11 Ma 1Click” can help you achieve results more efficiently.
【Trading Method 3】 Basic swing and day trading
This method is a simple approach of acquiring at the start flag and closing at the end flag.
Set the parameter “ScalMode_Flag” to OFF “false,” and hide scalping signs. ① Acquire a position with the start flag.
② Close with the end flag.
Acquisition and close are very simple, but the settings are actually very important.
Trading faithfully according to the signs yields a score panel result equal to the values shown.
Also, the profit and loss per trade is the largest with this method.
In other words, this method is simple yet requires the highest-level settings.
■ About settings: This method requires the highest-level settings. We recommend having the included “ATS-11 Ma AutoSearch.”
This post is about the following table’s■ section.
Using RSI to trade in line with the current trend, we will introduce some of the data extracted from “ATS.”
We will again explain how to read and use this data at the end of the article!
(Trading with 1,000,000 yen margin / 0.3 Lots)
Aggregation period: 2024/10/14 to 2024/10/19
In one week, profit of 17,908 yen was made!
Even with a small lot like “0.3 Lots,” this much profit is possible!
Previous’splus85,304 yencontinues to show good results!
Here, we will introduce actual trading results using the ‘ATS-11 Ma’.
There are several trading methods using ‘ATS-11 Ma,’ and we will also explain when to acquire and close positions with this system, and what settings were used.
We will also publish what settings were adopted.
Last Week’s Settings
[October 14]
[Settings Image 1]
[Settings Image 2]
As in the image above, set ‘ATS-11 Ma’ on two charts and trade with the above settings.
※ An automatic optimization data search engine is also included, so you can easily find settings that suit the current market!
Last Week’s Results!
[Trade history image]
[Trade history image / partial zoom]
The results are excellent!
In one week, profit of 17,908 yen was made!
This time, we traded using the pattern introduced later in “3. Swing & Day Trade (Intermediate/Advanced).”
Three trading methods are introduced at the end of this article.
Results up to the week before last!
(Trading with 1,000,000 yen margin / 0.3 lots)
Aggregation period: 2024/09/30 to 2024/10/12
The settings then
Plus 85,304 yen
[Trade history image]
Three trading methods
※ Images are reused from the “ATS-12 RSI” version.
The specifications are the same.
1. Beginner: One-shot Trade
【Trading Method 1】 High-win-rate, solid day-trading mode too!Acquisition at the first signal, close at the scalping-close point. A high-win-rate, solid trade is possible.
※ This method is recommended until you get the hang of it and start winning.
This method trades only once between the start flag and the end flag. The points gained are modest, but it is the highest win-rate and most reliable among the three. First, set the parameter “ScalMode_Flag” to ON “true.” The chart will display scalping-oriented acquisition and close points.
① The first flag is the acquisition point.
② Then close at the scalping close point.
③ If an end flag appears while holding a position, forcibly close then.
At first, after ① acquisition, when the ② point is shown, it is more prudent to close at the plus stage.
As you get used to it, aim for the 2nd and 3rd points, and later scalping close points.
■ About settings: The numbers on the score panel do not need to be as high as the other two methods.
2. Intermediate: Scalping Trading
【Trading Method 2】 Scalping mode!
This method is a scalping approach that trades several times between the start flag and end flag. Depending on the case, it can yield the most points among the three methods.
First, set the parameter “ScalMode_Flag” to ON “true.” Scalping acquisition and close points will be displayed.
① When the scalping acquisition point is shown, acquire the position.
② Close the position at the close point.
③ Trade several times until the end flag is displayed.
④ If an end flag appears while holding a position, forcibly close and wait for the next opportunity.
※ Regarding acquisition, we may use two main approaches among this method.
One is to acquire one position and then wait for the close point.
The other is to add positions in very small lots at each acquisition point and close all at the close points, repeating the process.
Either approach can yield results. In any case, until you get used to it, start with small lots and find a method that suits you.
Once you are accustomed to this method and can gain profits, try implementing it with higher settings using related systems. You should be able to achieve even greater results.
■ About settings: This method requires high-level settings.
Having tools like the automatic detector “ATS-11 Ma AutoSearch” and one-click acquisition with “ATS-11 Ma 1Click” can help you achieve results more efficiently.
3. Intermediate/Advanced: Swing & Day Trade
【Trading Method 3】 Basic swing and day trading
This method is a simple approach of acquiring at the start flag and closing at the end flag.
Set the parameter “ScalMode_Flag” to OFF “false,” and hide scalping signs. ① Acquire a position with the start flag.
② Close with the end flag.
Acquisition and close are very simple, but the settings are actually very important.
Trading faithfully according to the signs yields a score panel result equal to the values shown.
Also, the profit and loss per trade is the largest with this method.
In other words, this method is simple yet requires the highest-level settings.
■ About settings: This method requires the highest-level settings. We recommend having the included “ATS-11 Ma AutoSearch.”
This post is about the following table’s■ section.
Using RSI to trade in line with the current trend, we will introduce some of the data extracted from “ATS.”
We will again explain how to read and use this data at the end of the article!
(Paid Version) |
(All 8 sessions) (Free) |
(Free) |
(Free) |
||
| ATS-12 RSI | 70% OFF [From here] |
Free公開中！ [From here] |
to view [From here] |
Continuing strong [From here] |
|
| ATS-13 RCI | 75% OFF [From here] |
Start Decision! |
to view [From here] |
won with it! [From here] |
|
| ATS-11 Ma | 80% OFF [From here] |
Start planned! |
Please! [From here] |
|
× ![]()
