【Settings are only three】 the order to touch within 30 minutes right after purchase

Are there times immediately after deployment when you open every item and can’t tell which changes affected the display?

What should you do to save the screen that confirms all three items and finish the first day’s settings changes?

This time we will organize the 【Initial 30-minute Settings】 from authentication and operation display in order.

Good evening!

This is Masashi ^^

? 【Only Three Settings】 the order to touch in the first 30 minutes after purchase

When you first deploy and open all items, and you can’t tell which changes affected the display,

emotions tend to move before the usual order.

The focus this time is the 【Initial 30-minute Settings】. It’s not about flashy predictions, but making concrete places to pause judgment.

In the initial 30 minutes, don’t rely on the Golden Line Sniper AI as the answer,

and treat the screen you checked three items on as material to verify to finish the first day’s settings changes.

To put it bluntly, the standard this week is not to exhaust the functions on day one.

? Decide in advance where the initial 30-minute settings might break down

In practice, it’s easy to open all items right after deployment and end up not knowing which changes affected the display.

What you want to avoid is changing ununderstood features at the same time and leaving no standard state behind.

If your feelings are moving forward, first verify only the 【Authentication and Operation Display】.

If you proceed to the next step without explaining the first point in the initial 30 minutes, the display or knowledge will become excuses.

Therefore, if 【Authentication and Operation Display】 is vague,

it is okay to save the screen with the three items checked and finish the first day’s settings changes.

Scenes where you cannot explain Authentication and Operation Display should not progress to orders or holdings decisions.

The first stopping line is “do not try to use all features on day one.” This will be respected first.

? Rebuild the misconception that more lines mean more safety from the initial 30-minute settings

If there are five candidate lines, no matter where the market moves, one will be nearby.

This time we will leave the connection between 【Authentication and Operation Display】 and the lines as Connection 1-1.

In that state, you’re not just checking the reactions; you’re choosing a line close to where it moved after the fact.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 1-2.

So before buying, write one line on which you want to base your judgment.

We will leave the connection between 【AI Featured Display Position】 as Connection 1-3.

If your analysis volume has increased but performance isn’t stable, you may be looking at too many places.

We will leave the connection between 【Authentication and Operation Display】 as Connection 1-4.

What’s needed is not a new line, but today’s priorities: where to look and where to discard.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 1-5.

In terms of the Initial 30-minute Settings, looking at all lines isn’t thorough checking.

As an auxiliary line to leave only the screens before and after changes and the touched items, decide which lines you won’t use today to create time to wait for responses.

? Use of AI Focus Lines to Reduce Candidates Rebuilt from Initial 30-minute Settings

The AI Focus Line of the Golden Line Sniper AI is not a signal to enter as soon as displayed.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 2-1.

From the candidates you drew, it helps narrow down the spots to observe based on the current market.

We will leave the connection between 【AI Focus Display Position】 as Connection 2-2.

If you narrow to one, you can wait there until it arrives, and if there’s no reaction, discard it.

We will leave the connection between 【Authentication and Operation Display】 as Connection 2-3.

Reducing candidates becomes the biggest time-saver for people who keep watching the screen.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 2-4.

In terms of the Initial 30-minute Settings, AI is used not to increase candidates but to narrow down where to observe.

As an auxiliary line to leave only the screens before and after a change, when the display differs from your judgment, that difference itself becomes verification material.

??View details of the Golden Line Sniper AIView details of the Golden Line Sniper AI

? Redesign the three uses before London from the Initial 30-minute Settings? Redesign the three uses before London from the Initial 30-minute Settings

After opening the screen, write one line for the line you’re most curious about first.After opening the screen, write one line for the line you’re most curious about first.

We will leave the connection between 【AI Focus Display Position】 as Connection 3-1.We will leave the connection between 【AI Focus Display Position】 as Connection 3-1.

For example, whether it stops just before the Golden Line,For example, whether it stops just before the Golden Line,

decide one place to look and then check the display.decide one place to look and then check the display.

We will leave the connection between 【Authentication and Operation Display】 as Connection 3-2.We will leave the connection between 【Authentication and Operation Display】 as Connection 3-2.

After that, view the AI Focus Line and check whether it matches or shows another location.After that, view the AI Focus Line and check whether it matches or shows another location.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 3-3.We will leave the connection between 【Standard Lot and Warning Column】 as Connection 3-3.

Even if it matches, do not enter immediately; wait for the price to reach and wait for the reaction and the exit point.Even if it matches, do not enter immediately; wait for the price to reach and wait for the reaction and the exit point.

We will leave the connection between 【AI Focus Display Position】 as Connection 3-4.We will leave the connection between 【AI Focus Display Position】 as Connection 3-4.

If it does not match, do not keep both; today choose one to observe. This is the core of how to use it.If it does not match, do not keep both; today choose one to observe. This is the core of how to use it.

We will leave the connection between 【Authentication and Operation Display】 as Connection 3-5.We will leave the connection between 【Authentication and Operation Display】 as Connection 3-5.

In terms of the Initial 30-minute Settings, write your own judgment first, and then verify with the AI display afterward.In terms of the Initial 30-minute Settings, write your own judgment first, and then verify with the AI display afterward.

As an auxiliary line to leave only the screens before and after a change, when the display differs from your estimate, that difference itself becomes verification material.As an auxiliary line to leave only the screens before and after a change, when the display differs from your estimate, that difference itself becomes verification material.

❌ Do not add meaning to the lines where the price moved; rebuild from Initial 30-minute Settings

The most to be avoided is adding meaning to a nearby line after the price has moved.

We will leave the connection between 【Authentication and Operation Display】 as Connection 4-1.

With this method, any scene can later seem to have the correct answer.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 4-2.

Lines with no reaction should be removed; lines that did not come should not be used today.

We will leave the connection between 【AI Focus Display Position】 as Connection 4-3.

Being able to record the discarded candidates helps your skill at choosing surpass line-drawing technique.

We will leave the connection between 【Authentication and Operation Display】 as Connection 4-4.

In terms of the Initial 30-minute Settings, the lines that were discarded express judgment more than the lines that hit.

As an auxiliary line to leave only the screens before and after a change, on days when you cannot narrow down to one, you can designate it as a day for observation rather than orders.

✅ Rebuild the compatibility you want to confirm before purchase from the Initial 30-minute Settings

For those who already have their own lines and want aid to narrow candidates, this is a good fit.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 5-1.

Conversely, it is not suitable for those who want to enter the displayed location unconditionally.

We will leave the connection between 【AI Focus Display Position】 as Connection 5-2.

Golden Line Sniper AI is a tool to organize where to observe, not eliminate discretion.

We will leave the connection between 【Authentication and Operation Display】 as Connection 5-3.

If you have too many candidates and can’t wait, start by observing just one line.

We will leave the connection between 【Standard Lot and Warning Column】 as Connection 5-4.

In terms of the Initial 30-minute Settings, choose based on whether the thing you want to discard matches your feelings, not the number of features.

As an auxiliary line to leave only the screens before and after a change, reducing chart lines and creating a scene where you can wait is suitable for those who prefer this approach.

? Measure changes by the number of times you leave only the screens before and after changes touched

If you describe your current usage as is, you would open all items immediately after deployment,

and your confirmation order changes every time you can’t tell which changes affected the display.

If you continue like this, you will also change un-understood features at the same time and fail to leave a standard state,

so even reviewing the initial 30-minute settings won’t allow you to compare the same scenes.

Therefore, you will save the screen with the three items checked and finish the first day’s settings changes.

In records, by aligning the scenes you adopted with the before-and-after screens and touched items,

make the differences in the initial 30-minute settings visible.

For seven days, continue only leaving the before-and-after screens and touched items, so you can compare changes under the same conditions.

The numbers you look at after purchase are not only profits. Measuring changes by the number of times you leave only the before-and-after screens and touched items is also an important change.

One-week check: by placing the adopted scenes and the before-and-after screens and touched items side by side, record so the differences in the initial 30-minute settings are visible, and compare the same scenes next week.

? The meaning of spending money and time on the initial 30-minute setting

It is especially suitable for people who want to customize settings immediately after purchase.

In practice, because you will save the screen with three items checked to finish the first day’s settings changes,

you can create a change where you can stop in the middle of the decision.

The reason for purchase is not to buy a new forecast, but to have an environment where you don’t try to use all features on day one.

When you start, it’s enough to write first in one sentence: 【Check: Authentication and Operation Display】.

On the other hand, please confirm beforehand that the initial 30 minutes won’t complete the trading rules.

If your problem overlaps with the scene of the “Three settings after purchase: touching order in the first 30 minutes,” the reason to have Golden Line Sniper AI is clear.

Purchase decision: For those who want to customize settings right after purchase, compare not by feature names but by how daily actions change.

? One thing to change today and summary

So, for those who want to customize settings right after purchase, what should you change on your first try tomorrow?

It’s good to start by writing in one sentence: 【Check: Authentication and Operation Display】.

This week's theme was 【Initial 30-minute Settings】.

The three to check are Authentication and Operation Display, Standard Lot and Warning Column, and AI Focus Display Position.

If the three don’t connect, choose to finish the first day’s settings changes by saving the screen that checked all three.

The Golden Line Sniper AI used in the initial 30 minutes is a basis for not exhausting functions on day one; it does not guarantee profit.

If you want to customize settings right after purchase, please first use the same recording for one week to confirm how you use it ^^

If you are repeatedly indecisive about the three settings immediately after purchase, please decide the order to use Golden Line Sniper AI before waiting for the next market.

Purchasing check before the “Three settings after purchase: touching order in the first 30 minutes”: decide one thing you want to reduce from your current judgment, not what to increase with AI.

?View details of the Golden Line Sniper AI

Thank you always for reading ^^