This is Shirou!

The DSATEA for heaven and earth’s design has been updated, hasn’t it?

Prime Combo Signal is currently ver 4.01, Heaven and Earth’s Design is ver 6.00

In this articleI’ve summarized personal points to noteas such.

I hope this serves as a reference for using Prime Combo Signal and DSATEA in the future.

This article has.permission from Abusan

DSATEA Update 6.00 ver

There are really many indicators out there. Paid ones, free ones…

Some indicators are discontinued in sales or support, or updates are slow in coming, but

the Heaven and Earth series have been updated many times. I’m truly grateful to Abusan.

Now, in this DSATEA update

by introducing DSATEA into the chart of Prime Combo Signal,

you can enter when a sign is produced by Prime Combo Signal

which is the main update.

I’ve summarized the points of caution below.

DSATEA Update 6.00 ver – Summary of Cautions

① DSATEA PlaCon ON/OFF and ABUATR settlement

When DSATEA Prime Combo Signal is ON,

you can enter and settle according to the Prime Combo Signal.

There is no need to configure entry, filter, or settlement specifically in DSATEA.

If you turn it OFF, it will move according to DSATEA’s parameters.

Lot size depends on DSATEA and is applied by manual or automatic input.

ABUATR settlement

must be set in both Prime Combo Signal and DSATEA

as stated in the manual.

Be careful if you settle with ABUATR.

② One-tick delay

There will always be a one-tick delayaccording to the manual.

Actual entry

What is one tick

If you look at the bid/ask, you’ll understand easily.

Thatone pump is one tick.

↓

Quote — one tick (down by 0.27 pips)

When the value changes once, that means one tick has updated

in this instance.

The flow is as follows:

• Sign occurs on Prime Combo Signal (DSATEA has not noticed yet)
• One tick updates
• DSATEA notices and enters

Thusthe sequenceensures a one-tick delay.

This is by design

as a specification.

③ Forced settlement

There are two patterns for forced settlements.

• Candle breakout or slippage due to sharp increases/decreases
• Sign disappears due to delayed MTF update

If there is a breakout or slippage causing repaint on Prime Combo Signal, a forced settlement occurs.

Also, if a repaint happens due to delayed MTF update causing the sign to disappear, once the candle closes, forced settlement occurs.

For example, if you’re using the oscillator TF2 filter and a sign appears.

If the TF2 color changes later and then it confirms, it will be forced settled.

Important cautions

Finally, there is something I want to convey to people dealing with Prime Combo Signal × DSATEA.

That is

you must not become too method-ambiguous

.

This EA with so many parameter items is probably new to many of you as well.

It’s the same for me.

Although the freedom is high,

• “This setting might be good”
• “Let me try that setting”

and the ability to test infinite combinations is fantastic, a major advantage of Prime Combo Signal.

However,many people make the test the goalas well.

That itself isn’t bad, but you should still

find what method works best for you
and run with the setting that suits you

Even if others say this setting is good,you should ask yourself if it’s right for you

If you lose track here, you won’t know which is better, and your mindset will likely collapse and you’ll exit FX.

Because that isn’t your own method.

Win rate, attainable pips, mindset—truly varies by person, sowhat is good for youis what matters.

Thank you for reading until the end.